Sikalastic-391 N
High-durability polyurethane wear course with anti-skid properties for parking decks and traffic areas.
Specifications
-
Product Type: Two-component polyurethane wear course
-
Finish: Textured, anti-skid (with quartz sand)
-
Mixing Ratio: 2.5 : 1 (Part A : Part B by volume)
-
Pot Life: 35–40 minutes at 23 °C
-
Recoat Time: ~8 hours
-
Walk-On Time: ~16 hours
-
Light Vehicle Traffic: ~24 hours
-
Full Cure: ~7 days
-
Packaging: 17.5 L (4.62 US gal.) unit
-
Shelf Life: 1 year (unopened)
Product Details
Sikalastic-391 N is a two-component polyurethane wear layer designed to protect Sikalastic-390 waterproofing membranes while adding a durable, slip-resistant surface.
It is mainly used in parking garages and traffic areas, where surfaces are exposed to vehicle movement, abrasion, and wear. When combined with broadcast quartz sand, it creates a tough, anti-skid finish that improves safety and extends the life of the waterproofing system below.
This product cures into a hard yet flexible coating, allowing it to handle traffic loads without cracking. It is solvent-free, low-odor, and supplied in pre-measured units, making it safer and easier to mix and apply on site.
Downloads (PDF)
Technical Data Sheets
Safety Data Sheets
Related Products
Chem Dye (Pigment Pods)
CHEM DYE™ Pigment Pods are high-performance, zero-VOC liquid pigments designed for easy mixing into epoxy and polyaspartic floor coatings, delivering consistent, vibrant, and UV-stable color.
Mapefloor EP 19
Mapefloor EP 19 is a three-component epoxy binder designed to improve the adhesion of multilayer floor systems, such as MAPEI’s Mapefloor EP 20 [NA] and Mapefloor I 302 SL [NA]. It is typically applied on concrete surfaces that require leveling with a slight slope and to repair deteriorated concrete.
Sikagard SN-100
Deep-penetrating, 100% silane water-repellent sealer for concrete and masonry. Protects against moisture, chloride intrusion, and freeze/thaw damage while allowing substrates to breathe.
epoxy
Sikafloor - 1620 MVB
High-solids, low-permeability epoxy moisture vapour control primer for concrete substrates. Reduces MVER up to 25 lbs and compliant with ASTM F3010.