Chem Proof SC
100% solids, slow cure epoxy moisture barrier primer for concrete floors with high residual moisture—designed to prevent coating and flooring failures.
Specifications
-
Product Type: Epoxy Moisture Barrier Primer
-
System Use: Primer / Basecoat
-
Primer: Yes
-
Basecoat: Yes
-
Topcoat: No
-
Solids Content: 100% solids
-
Working Time: 20 minutes
-
Dry Time: 4–6 hours
-
Water Based: No
-
Moisture Tolerance: Up to 25 lb / 24 hr / 1,000 sq. ft.
-
Substrates: Concrete with high residual moisture
-
Application Areas: Commercial, industrial, residential concrete floors
Product Details
CHEM PROOF SC Slow Cure Epoxy is a high-performance, 100% solids, 0 VOC, two-component epoxy primer engineered specifically as a moisture barrier for concrete floors with extremely high residual moisture levels. Designed to tolerate moisture emissions of up to 25 lb per 24 hours per 1,000 sq. ft., it provides a reliable solution for challenging substrates prior to installing floor coatings, coverings, or parquet.
This epoxy functions as both a primer and basecoat, creating a dense, impermeable layer that blocks moisture vapor transmission while enhancing adhesion for subsequent flooring systems. Its controlled 20-minute working time allows for proper placement and penetration, while the 4–6 hour dry time supports efficient project turnaround.
Downloads (PDF)
Technical Data Sheets
Safety Data Sheets
Related Products
Mapefloor EP 19
Mapefloor EP 19 is a three-component epoxy binder designed to improve the adhesion of multilayer floor systems, such as MAPEI’s Mapefloor EP 20 [NA] and Mapefloor I 302 SL [NA]. It is typically applied on concrete surfaces that require leveling with a slight slope and to repair deteriorated concrete.
Polyurethane
Dur-A-Hard TG
Two-component aliphatic polyurethane floor coating available in clear and pigmented options, with 400 sq. ft./gal. coverage at 3 mils DFT and a 60-minute working time.
epoxy
Sikafloor - 1620 MVB
High-solids, low-permeability epoxy moisture vapour control primer for concrete substrates. Reduces MVER up to 25 lbs and compliant with ASTM F3010.
Chip Brush (Pack Of 36)
Chip Brush (Pack Of 36) Creating and providing high-quality painting tools that simplify the demanding and time-consuming task of painting is our primary objective. The Topline Paint brush series has undergone rigorous testing and demonstrated exceptional performance across various painting mediums, including watercolor, acrylic, latex, epoxy, varnish, and oil-based coatings, suitable for both interior and exterior […]