LABFENDER (NEW) 240
High-performance moisture-cured aliphatic polyurethane floor coating with outstanding abrasion resistance, chemical resistance, and UV protection. Ideal as a protective topcoat over epoxy and poly-aspartic systems.
Specifications
-
Moisture-cured aliphatic polyurethane, high solids, low-VOC / low-odor
-
Exceptional abrasion resistance – withstands heavy traffic without visible wear
-
Superior chemical resistance – up to 60x more protection against plasticizer transfer
-
Full UV protection – significantly delays yellowing of underlying coatings
-
Long working time for efficient installation with minimal crew
-
Designed as a protective topcoat over LABPOX® epoxies, LABFAST®, and LABSHIELD® ECO
Curing Properties:
-
Working Time: 60 min
-
Tack Free: 3 – 4 h
-
Recoat Time: N/A
-
Dry Through: 10 – 12 h
-
Foot Traffic: 12 h
-
Light Traffic: 24 h
-
Pot Life: 3 h
-
Full Cure: 2 weeks
Product Details
LABFENDE (NEW) 240 is a moisture-cured, aliphatic polyurethane floor coating designed for both interior and exterior concrete flooring systems. Formulated as a two or three-component, high-solids, low-VOC coating, it provides long-lasting protection against wear, chemicals, and UV exposure.
Engineered to be applied over LABPOX epoxies, LABFAST polyaspartics, and LABSHIELD ECO coatings, LABFENDER (NEW) significantly improves floor performance with superior abrasion resistance, preventing traffic pattern wear even in high-use environments.
Its advanced chemical resistance provides up to 60× more protection against plasticizer transfer, ensuring floors stay clean and resistant to premature staining. With full UV protection, this polyurethane topcoat delays epoxy yellowing, maintaining aesthetics and durability in demanding industrial, commercial, and institutional settings.
The long working time of LABFENDER (NEW) allows larger installations with fewer applicators, making it cost-effective and efficient for contractors.
PACKAGING:
1 Gallon Kit = 1 × Part A (0.8 Gal) + 1 × Part B (0.2 Gal) + 1 × Part C (3 lb LABTEC Aluminum Oxide)
Related Products
Elastocolor Coat
Elastocolor Coat is a high-performance, water-based, 100%-acrylic coating designed to protect and decorate above-grade, exterior/interior vertical surfaces such as concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites, and EIFS systems.
CHEM FLUX
CHEM FLUX is a solvent-less, low VOC, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties. This system complies with the Canadian Food Inspection Agency (CFIA) View MSDS A View MSDS B
SPIKE SHOES FOR EPOXY
SPIKE SHOES FOR EPOXY, are a must-have accessory when applying epoxy coatings and/or urethanes. Spiked shoes allow you to walk on the coating as you apply it as the sharp spikes protect the coating and help release trapped air, so you don’t get bubbles forming. Each shoe comes with dual straps that securely fasten to […]
Roller frame 9"
Roller frame 9″ Threaded end to use a standard extension pole for hard to reach places. Plastic grip handle. Zinc-Plated Wire Frame Cage.