3 GAL Resin kit for Garage Floor Coating Applications - 100% epoxy
3 GAL Resin kit for Garage Floor Coating Applications Increased durability: The combination of epoxy and polyaspartic results in a floor with exceptional resistance to abrasion, chemicals, impacts, and UV degradation. Packaging 3 GAL, 15 GAL, 150 GAL, 750 GAL Color Part A Part B Part C Upon Request Clear to Amber Upon Request Recommended […]
Specifications
Product Details
3 GAL Resin kit for Garage Floor Coating Applications Increased durability: The combination of epoxy and polyaspartic results in a floor with exceptional resistance to abrasion, chemicals, impacts, and UV degradation.
| Packaging | 3 GAL, 15 GAL, 150 GAL, 750 GAL |
| Color | Part A Part B Part C Upon Request Clear to Amber Upon Request |
| Recommended Thickness | Primer Finish Coat 6-8 mils 8-12mils |
| Mileage per gallon (8 mils thickness) | 200 ft2 |
| Mileage for Slurry Application (50% Silica Sand) (12 mils thickness) |
125 ft2 |
| Mileage for Trowel Epoxy Application (85% Silica Sand) (24 mils application) |
60 ft2 |
| Shelf Life | 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat or moisture. Keep out of direct sunlight and away from fire hazards |
| Mix Ratio, by volume | A: B-2:1 |
| Solids Content | 100% |
| Coverage | A:B=75 – 600 P.C. |
| Pot Life (454 g) | 15-20 minutes |
| Working Time | 35 minutes |
| Tack Free | 12 hours |
| Pedestrian | 24 hours |
| Traffic | 48 hours |
Related Products
Additix PE
Additix PE is a lightweight powder made from synthetic fibers, designed to enhance the viscosity and thixotropy of epoxy-based and polyurethane-based resin products.
CHEM PROOF
CHEM PROOF is a solvent-less, low VOC, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties. This system complies with the Canadian Food Inspection Agency (CFIA). View MSDS A View MSDS B Packaging 2.5 GAL Shelf Life 12 months in original unopened factory sealed containers. Keep away from extreme cold, […]
Ardex Feather Finish 10 LBS
Ardex Feather Finish 10 LBS, is a self-drying underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile). Blend of hydraulic and other cements Self-drying […]
Mapefloor EP 20
Mapefloor EP 20 [NA] is a three-component epoxy binder designed to improve the adhesion of multilayer floor systems, such as MAPEI’s Mapefloor EP 19 [NA] and Mapefloor I 302 SL [NA]. It is typically applied to concrete surfaces that require re-profiling, such as floor slabs in institutional buildings, storage, and logistical areas.