Sika Duroplast 150
Two-part, water-based, antimicrobial epoxy wall coating with glossy finish, UV resistance, and low odour for high-performance interior environments.
Specifications
- Waterproof – suitable for wet service areas
- Fine-textured finish with excellent opacity
- Superior UV color stability compared to traditional epoxies
- CFIA & USDA compliant for food plants
- Custom colors available upon request
- Coverage :
-
- 6.5 – 9.8 m²/L (265 – 400 ft²/US gal) per coat
- 4–6 mils wet film thickness (w.f.t.)
- 2–3 mils dry film thickness (d.f.t.)
- Typically requires two coats
- Additional coats may be required for highly absorbent substrates
-
- Mix Ratio (A:B): 4:1 by volume
- Pot Life:
-
- ~6 hours at 23°C (250 g sample)
- Do not apply after 6 hours even if material remains liquid
-
- Curing Time:
-
- Touch Dry: ~4.5 hours
- Recoat: 6 – 48 hours
- Full Cure: ~7 days
-
- Packaging:
-
- 18.9 L (5 US gal.) units
-
- Read the TDS attached below for more advanced technical information.
Product Details
Sika Duroplast 150 is a two-part, low-odor, water-based epoxy wall coating designed to deliver a durable, glossy, ceramic-like finish for demanding interior environments. This fine-textured, pigmented coating provides excellent opacity and color uniformity while offering superior UV resistance compared to traditional epoxy wall systems.
Engineered for healthcare, pharmaceutical, food processing, and institutional facilities, Sika Duroplast 150 creates a seamless, waterproof, easy-to-clean surface with excellent resistance to fungi and microbiological growth. It can be applied over properly prepared and primed concrete masonry, gypsum board, and common steel substrates and is fully compatible within Sikagard Duroplast epoxy wall coating systems as a body coat or top coat.
Downloads (PDF)
Technical Data Sheets
Safety Data Sheets
SDS SIKA DUROPLAST 150 – PART A
Related Products
Polyaspartic
LABSHIELD ECO+ (Prolonged Working Time)
LABSHIELD ECO+ is a 100% solids, low-odor polyaspartic coating with extended working time, UV stability, and superior durability for concrete floors.
Elastocolor Coat
Elastocolor Coat is a high-performance, water-based, 100%-acrylic coating designed to protect and decorate above-grade, exterior/interior vertical surfaces such as concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites, and EIFS systems.
Polyaspartic
LABFAST 85 PRO
A professional-grade, low-odor polyaspartic floor coating with rapid curing and full UV protection—perfect for one-day concrete floor installations.
NIGHTFALL
NIGHTFALL, Epoxy flakes, also known as epoxy chips, elevate the aesthetics and durability of surfaces like garages and concrete floors. These small, colorful chips, crafted from resilient epoxy resin, create a visually appealing and textured surface. With a broad spectrum of colors, they offer customization, adding depth and dimension for a unique look. Beyond aesthetics, […]