Sikafloor - 1620 MVB
High-solids, low-permeability epoxy moisture vapour control primer for concrete substrates. Reduces MVER up to 25 lbs and compliant with ASTM F3010.
Specifications
- Product Type: Moisture vapour control epoxy primer
- Mix Ratio: 3:1 (A:B) by volume
- Finish: Translucent blue (with trace dye)
- Permeability: ~0.06 perms @ 15 mil DFT (ASTM E96)
- Curing Time:
- At 10°C (50°F):
- Foot Traffic: ~36 hours
- Full Cure: ~10 days
- At 20°C (68°F):
- Foot Traffic: ~18 hours
- Full Cure: ~7 days
- At 30°C (86°F):
- Foot Traffic: ~8 hours
- Full Cure: ~4 days
- At 10°C (50°F):
Product Details
Sikafloor®-1620 is a high-solids, low-viscosity, moisture vapour control epoxy primer engineered to reduce moisture vapour transmission in concrete substrates. Designed in compliance with ASTM F3010, this advanced multi-component epoxy system forms a dense, low-permeability film that protects resinous floor coatings from moisture-related failures.
Ideal for concrete substrates with moisture content up to 6% (by weight), Sikafloor®-1620 delivers superior penetration, stabilization, and adhesion while resisting high moisture vapour emission rates (MVER up to 25 lbs per ASTM F1869) and 100% relative humidity (ASTM F2170). Its translucent blue trace dye ensures complete and uniform coverage during installation.
With high compressive strength, excellent bond performance, resistance to substrate outgassing, and low VOC content, Sikafloor®-1620 is the ideal moisture mitigation primer for use beneath Sikafloor®, Sikagard®, and Sikalastic® resin flooring systems in commercial, institutional, and industrial environments.
Downloads (PDF)
Technical Data Sheets
Safety Data Sheets
Related Products
CHEM FLUX
CHEM FLUX is a solvent-less, low VOC, two component epoxy coating system. It exhibits very good appearance and chemical and physical properties. This system complies with the Canadian Food Inspection Agency (CFIA) View MSDS A View MSDS B
Mapecoat EPN 24
Mapecoat EPN 24 [NA] is a two-component, high-solids, epoxy-novolac coating designed for surfacing and containment lining.
OLYMPIC
OLYMPIC, Epoxy flakes, also known as epoxy chips, elevate the aesthetics and durability of surfaces like garages and concrete floors. These small, colorful chips, crafted from resilient epoxy resin, create a visually appealing and textured surface. With a broad spectrum of colors, they offer customization, adding depth and dimension for a unique look. Beyond aesthetics, […]
epoxy
Sikafloor-2002
Sikafloor-2002 is a water-clear, high-gloss epoxy resin binder and top coat with low VOCs, ideal for decorative Sikafloor quartz, flake, and metallic flooring systems.